1937 Web Equipment Pattern (also known as '37 Webbing ') is a military load carrier item. This replaces Pattern 1908 and Pattern 1925 - which became the basis - and is a standard problem for British and Commonwealth forces since its introduction in 1937, during World War II, and in the post-war period until it was replaced by 58 webbing patterns.
Video 1937 Pattern Web Equipment
Development
During the 1930s the introduction of new weapons such as Bren machine guns and planned mechanization of the British Army led to the necessity of developing new designs for the equipment carrying the army's basic loads. The introduction of weapons with high fire rates means that soldiers have the requirement to bring more ammunition than before, while mechanization means that soldiers should be able to move freely within the limits of their vehicles. The increasingly complex nature of combat and the different roles that soldiers and members of other services must perform means that the new design must be flexible, so it is decided that new designs can be exchanged, which can be modified to fit the individual needs of a soldier based on his role.
The design was confirmed on June 8, 1938 and a wide-scale problem began in 1939. Toward the end of World War II, about 37 Webbings were produced in the green forests for troops who fought in the Pacific Theater, even though it was made 44 Patterns of Webbing purposes. introduced for humid forest conditions, becomes lighter, dry faster and decompose. Although the Pattern continued to be used with the British Army for forest warfare in various post-World War II colonial conflicts, it did not replace the 37 Patterns in public service, which were used until the introduction of the 58 Patterns. However, 37 Patterns were used for the second line and supported troops such as RAMC into the early 70s and were still issued to Cadets in the 1990s.
Maps 1937 Pattern Web Equipment
Description
1937 The woven pattern is made of woven cotton, which is waterproof and dyed before weaving. They are made of polished brass - post-blackened steel wars - and produced by various manufacturers. It is manufactured in khaki colors for the Army, which can then be dyed with Blanco, most often into Pea Green (light green) and blue-gray for the Royal Air Force (the latter using the earlier 1925 edition of ammunition bags and a glove for the revolver issued together with 37 Pattern teeth). Military Police cleanses their skin.
Standard components include a belt (published in the size of the N ormal and L arge), the cross (called 'braces'), the cartridge pouch for ammunition.303 (which gives way for 'universal' pockets to carry ammunition for various infantry weapons then used by the British Army, in addition to grenades), carriers for waterbottle and small packages. The large package (1908) - intended to be carried in regimental transport except when in full marching sequence - and the burning carrier was defended from the problems of World War I, although the latter was originally published in modified form before it was reintroduced in 1941. Frogs for bayonets 1907 SMLE and No.4 Rifle were also issued. Different combinations of these components consist of 'marching order' and 'battle order' respectively. In addition, various items are issued for use by officers and often crew of armored vessels, such as pockets for binoculars, handgun ammunition and compass (externally similar to ammunition guns but with bearings inside), as well as valise sides of the pack and gloves for revolvers 0.38 (version of the tank crew with leg straps also in two versions).
A number of items were issued that fit the Patterns in their fixtures and materials but were not entirely part of the set, such as bandolier for Sten magazine as issued to air forces and a barrel spare bag and wallet portion for Bren guns.
Components
Basic Components
- Haversack, All Ratings : A rectangular bag attached to a clamp ends on the left hip. It was partitioned in the middle and the back partition was split in two, with two cans of Mess kept on one side and Mark VII Water Bottle and its woven harness kept on the other side. It is worn on the back when a large package is not used. In this case, the poncho is folded to protect the back and visible under the cover.
- Binoculars Case : Box carrying Binoculars and binoculars. The back of the casing is attached to the web belt with two long oval metal hooks. The same case can also be used to carry iron vision for BREN guns mounted on a tripod; it comes in a wooden box fitting to protect and protect it.
- Compass Bag : A square bag of the same size and shape as a handgun ammunition bag unless it feels to protect the compass. It is above the Binocular Case attached to the right side shoulder straps.
Sarong
- Pistol Case: A cross-draw belt worn on the left hip designed to bring Enfield No. 2 Revolver.
Case of the Pistol, Royal Tank Corps (1916-1939)/Royal Armored Corps (1939-Now): Straight thighbuck worn on the right thigh used by the commander Tank to bring Enfield No. 2 Revolver. It has a long strap that allows to extend to the upper legs and strap a tie in a holster to secure it. It has six rounds of bullets in the side of the holster to hold ammunition and cleaner pockets along the front edge. There is a picture showing Commandos wearing a cross-draw shoulder holster worn under the left armpit made from a conversion version of this rig.
Ammunition Operator
Source of the article : Wikipedia
0 Comments